Hannan Products Corporation

Phone 800-954-4266


AP3 Automatic Hole Punch

Standards Begin Here

(Click here to see more "Full Site")


PRO PACK® AP3 Automatic Power Hole Punch Machine $1,195.00



PRO PACK AP3 Automatic Hole Punch Machine


The New PRO PACK AP3 Automatic Hole Punch Machine is a simple way to punch hang holes, slots or rounding corners on your printed carded packaging. Also great for cut outs of shapes, forms, or parts in plastic, paper, foam, leather, and a variety of other materials and applications.


The New PRO PACK AP3 Automatic Hole Punch Machine is ready to go to work right out of the box. Just plug it in, connect it to your air and immediately you can start to punch or trim production from one piece prototypes to hundreds of thousands of pieces per year!


This machine is small enough to fit on a desktop, quite enough for the office, with it's heavy-duty construction it can withstand the hardest possible production runs and does the job of machines costing thousands of dollars more.


Instant punch die tooling changeover with this machine is ideally suited for short or long run production. Choose from several PRO PACK standard punch dies or we can manufacturer custom punch dies for your special project.


With high quality standards, in stock and ready to ship, you will have a low cost punching system that will grow with your needs.


The PRO PACK Standard Packaging System is an absolute break-through from the professional innovators at Hannan Products Corporation.


Packaging Made Easy / Packaging Made in America






MP3 Manual Hole Punch

Standards Begin Here

(Click here to see more "Full Site")


PRO PACK® Manual Hole Punch Machine $798.00



PRO PACK MP3 Manual Hole Punch Machine


The New PRO PACK MP3 Manual Hole Punch Machine is a simple way to punch hang holes, slots or rounding corners on your printed carded packaging. Also great for cut outs of shapes, forms, or parts in plastic, paper, foam, leather, and a variety of other materials and applications.


The New PRO PACK MP3 Manual Hole Punch Machine is ready to go to work right out of the box. Immediately you can start to punch or trim production from one piece prototypes to hundreds of thousands of pieces per year!


This machine is small enough to fit on a desktop, quite enough for the office, with it's heavy-duty construction it can withstand the hardest possible production runs and does the job of machines costing thousands of dollars more.


Instant punch die tooling changeover with this machine is ideally suited for short or long run production. Choose from several PRO PACK standard punch dies or we can manufacturer custom punch dies for your special project.


With high quality standards, in stock and ready to ship, you will have a low cost punching system that will grow with your needs.


The PRO PACK Standard Packaging System is an absolute break-through from the professional innovators at Hannan Products Corporation.


Packaging Made Easy / Packaging Made in America







PRO PACK® Blister Sealing

Standards Begin Here

(Click here to see more "Full Site")


PRO PACK® B6X9 Packaging Machine $1,795.00





PRO PACK® B6X9 Blister/Tray Sealing Machine

The revolutionary New PRO PACK® B6X9 Blister/Tray Sealing Machine and Hannan's New system of standard cards, standard blisters and standard tooling will slash the cost and complexity of most small part blister card packaging production.

The New PRO PACK® B6X9 Blister/Tray Sealing Machine is ready to go to work right out of the box. Just plug it in connect it to your air and start packaging your product/s... from one piece prototypes to as many as 500,000 pieces per year or more!

This machine is small enough to fit on a desktop, quite enough for the office and does the job of machines costing tens of thousands of dollars more.

Instant tooling changeover with this machine is ideally suited for short or long run production. The balanced heat platen, automatic thermostat, and self-aligning pressure system assure the proper sealing of materials every time.

With high quality standard cards and standard blisters in stock and ready to ship, you will have a low cost blister packaging system that will grown with your needs.

The PRO PACK® Standard Packaging System is an absolute break-through from the professional innovators at Hannan Products Corporation.

Packaging Made Easy and Made in America







PRO PACK® Blister B9X12:

Standards Begin Here

(Click here to see more "Full Site")


PRO PACK® B9X12 Packaging Machine $2,950.00



PRO PACK® B9X12 Blister/Tray Sealing Machine

The revolutionary New PRO PACK® B9X12 Blister/Tray Sealing Machine and Hannan's New system of standard cards, standard blisters and standard tooling will slash the cost and complexity of most small part blister card packaging production.

The New PRO PACK® B9X12 Blister/Tray Sealing Machine is ready to go to work right out of the box. Just plug it in connect it to your air and start packaging your product/s... from one piece prototypes to as many as 850,000 pieces per year or more!

This machine is small enough to fit on a desktop, quite enough for the office and does the job of machines costing tens of thousands of dollars more.

Instant tooling changeover with this machine is ideally suited for short or long run production. The balanced heat platen, automatic thermostat, and self-aligning pressure system assure the proper sealing of materials every time.

With high quality standard cards and standard blisters in stock and ready to ship, you will have a low cost blister packaging system that will grown with your needs.

The PRO PACK® Standard Packaging System is an absolute break-through from the professional innovators at Hannan Products Corporation.

Packaging Made Easy and Made in America







PRO PACK® Blister B12X18:

Standards Begin Here

(Click here to see more "Full Site")


PRO PACK® B12X18 Packaging Machine $4,870.00



PRO PACK® B12X18 Blister/Tray Sealing Machine

The revolutionary New PRO PACK B9X12 Blister/Tray Sealing Machine and Hannan's New system of standard cards, standard blisters and standard tooling will slash the cost and complexity of most small part blister card packaging production.

The New PRO PACK® B12X18 Blister/Tray Sealing Machine is ready to go to work right out of the box. Just plug it in connect it to your air and start packaging your product/s... from one piece prototypes to as many as 3,360,000 pieces per year or more!

This machine is small enough to fit on a desktop, quite enough for the office and does the job of machines costing tens of thousands of dollars more.

Instant tooling changeover with this machine is ideally suited for short or long run production. The balanced heat platen, automatic thermostat, and self-aligning pressure system assure the proper sealing of materials every time.

With high quality standard cards and standard blisters in stock and ready to ship, you will have a low cost blister packaging system that will grown with your needs.

The PRO PACK® Standard Packaging System is an absolute break-through from the professional innovators at Hannan Products Corporation.

Packaging Made Easy and Made in America







PRO PACK® Blister B18X24:

Standards Begin Here

(Click here to see more "Full Site")


PRO PACK® B18X24 Packaging Machine $7,995.00



PRO PACK® B18X24 Blister/Tray Sealing Machine

The revolutionary New PRO PACK B1824 Blister/Tray Sealing Machine and Hannan's New system of standard cards, standard blisters and standard tooling will slash the cost and complexity of most small part blister card packaging production.

The New PRO PACK® B18X24 Blister/Tray Sealing Machine is ready to go to work right out of the box. Just plug it in connect it to your air and start packaging your product/s... from one piece prototypes to as many as 5,040,000 pieces per year or more!

This machine is small enough to fit on a desktop, quite enough for the office and does the job of machines costing tens of thousands of dollars more.

Instant tooling changeover with this machine is ideally suited for short or long run production. The balanced heat platen, automatic thermostat, and self-aligning pressure system assure the proper sealing of materials every time.

With high quality standard cards and standard blisters in stock and ready to ship, you will have a low cost blister packaging system that will grown with your needs.

The PRO PACK® Standard Packaging System is an absolute break-through from the professional innovators at Hannan Products Corporation.

Packaging Made Easy and Made in America







Med Pack MB6X9 Tray Sealing

(Click here to see more "Full Site")



MED PACK® MB6X9 Packaging Machine $5,385.00



MED PACK MB6X9

MEDICAL TRAY SEALING MACHINE


The revolutionary New MED PACK MB6X9 Medical Tray Sealing Machine has been engineered for reliability, high productivity, and efficient sustainable use of space and energy that will slash the cost and complexity of your medical packaging production!

The New MED PACK MB6X9 Tray Sealing Machine is ready to go to work right out of the box. Just plug it in connect it to your air and start packaging your product/s...from one piece prototypes to as many as 500,000 pieces per year or more!

This machine is small enough to fit on a desktop, quite enough for the office/lab and does the job of machines costing thousands of dollars more.

Instant tooling changeover with this machine is ideally suited for short or long run production. With the balanced heat platen, automatic thermostat, and self-aligning pressure system your assured the proper sealing of materials every time.

MED PACK can also manufacture your custom medical blister/tray seal tooling for your next packaging project. With the highest quality standards you will have a low cost blister/tray sealing system that will grow with your needs.

The MED PACK Packaging System is an absolute break-through from the professional innovators at Hannan Products Corporation.


Packaging Made Easy / Packaging Made in America






MED PACK® MB9X12 Tray Sealing

(Click here to see more "Full Site")



MED PACK® MBMB9X12 Packaging Machine $6,7425.00



MED PACK MB9X12

MEDICAL TRAY SEALING MACHINE


The revolutionary New MED PACK 9X12 Medical Tray Sealing Machine has been engineered for reliability, high productivity, and efficient sustainable use of space and energy that will slash the cost and complexity of your medical packaging production!

The New MED PACK MB6X9 Tray Sealing Machine is ready to go to work right out of the box. Just plug it in connect it to your air and start packaging your product/s...from one piece prototypes to as many as 840,000 pieces per year or more!

This machine is small enough to fit on a desktop, quite enough for the office/lab and does the job of machines costing thousands of dollars more.

Instant tooling changeover with this machine is ideally suited for short or long run production. With the balanced heat platen, automatic thermostat, and self-aligning pressure system your assured the proper sealing of materials every time.

MED PACK can also manufacture your custom medical blister/tray seal tooling for your next packaging project. With the highest quality standards you will have a low cost blister/tray sealing system that will grow with your needs.

The MED PACK Packaging System is an absolute break-through from the professional innovators at Hannan Products Corporation.


Packaging Made Easy / Packaging Made in America






MED PACK® MB12X18 Tray Sealing

(Click here to see more "Full Site")



MED PACK® MB12X18 Packaging Machine $7,550.00



MED PACK MB12X18

MEDICAL TRAY SEALING MACHINE


The revolutionary New MED PACK MB12X18 Medical Tray Sealing Machine has been engineered for reliability, high productivity, and efficient sustainable use of space and energy that will slash the cost and complexity of your medical packaging production!

The New MED PACK MB6X9 Tray Sealing Machine is ready to go to work right out of the box. Just plug it in connect it to your air and start packaging your product/s...from one piece prototypes to as many as 3,360,000 pieces per year or more!

This machine is small enough to fit on a desktop, quite enough for the office/lab and does the job of machines costing thousands of dollars more.

Instant tooling changeover with this machine is ideally suited for short or long run production. With the balanced heat platen, automatic thermostat, and self-aligning pressure system your assured the proper sealing of materials every time.

MED PACK can also manufacture your custom medical blister/tray seal tooling for your next packaging project. With the highest quality standards you will have a low cost blister/tray sealing system that will grow with your needs.

The MED PACK Packaging System is an absolute break-through from the professional innovators at Hannan Products Corporation.


Packaging Made Easy / Packaging Made in America






MED PACK® MB18X24 Tray Sealing

(Click here to see more "Full Site")



MED PACK® MBMB18x24 Packaging Machine $12,395.00



MED PACK MB18X24

MEDICAL TRAY SEALING MACHINE


The revolutionary New MED PACK MB18X24 Medical Tray Sealing Machine has been engineered for reliability, high productivity, and efficient sustainable use of space and energy that will slash the cost and complexity of your medical packaging production!

The New MED PACK MMB18X24 Tray Sealing Machine is ready to go to work right out of the box. Just plug it in connect it to your air and start packaging your product/s...from one piece prototypes to as many as 5,040,000 pieces per year or more!

This machine is small enough to fit on a desktop, quite enough for the office/lab and does the job of machines costing thousands of dollars more.

Instant tooling changeover with this machine is ideally suited for short or long run production. With the balanced heat platen, automatic thermostat, and self-aligning pressure system your assured the proper sealing of materials every time.

MED PACK can also manufacture your custom medical blister/tray seal tooling for your next packaging project. With the highest quality standards you will have a low cost blister/tray sealing system that will grow with your needs.

The MED PACK Packaging System is an absolute break-through from the professional innovators at Hannan Products Corporation.


Packaging Made Easy / Packaging Made in America






511S 12X18

Standards Begin Here

(Click here to see more "Full Site")


511S 12X18 Blister Sealing Machine $6,500.00



HANNAN 511S 12X18

Blister / Tray Sealing Machine


The HANNAN 511S 12X18 Blister/Tray Sealing Machine has been engineered for reliability, high productivity, and efficient sustainable use of space and energy.


HANNAN's New system of standard cards, standard blisters and standard tooling for most small part blister card packaging will slash the cost and complexity of blister packaging production. HANNAN also manufactures custom cards, blister, and tooling for your next packaging project.


This machine has everything needed to produce the highest quality package at the fastest possible rate, for a variety of product/s and packaging applications. HANNAN machinery is designed to withstand rugged, continuous production use with a minimum of maintenance and operator skill saving your company time and money.


With instant tooling changeover these machines are ideally suited for short and long run packaging production. With the balanced heat platen, automatic thermostat, and self-aligning pressure system your assured the proper sealing of materials every time.


The Standard Packaging System is an absolute break-through from the professional innovators at Hannan Products Corporation.



Packaging Made Easy / Packaging Made in America





511S 18X24

Standards Begin Here

(Click here to see more "Full Site")


Blister Sealing Machine511S 18X24 $8,900.00



HANNAN 511S 18X24

Blister / Tray Sealing Machine


The HANNAN 511S 18X24 Blister/Tray Sealing Machine has been engineered for reliability, high productivity, and efficient sustainable use of space and energy.


HANNAN's New system of standard cards, standard blisters and standard tooling for most small part blister card packaging will slash the cost and complexity of blister packaging production. HANNAN also manufactures custom cards, blister, and tooling for your next packaging project.


This machine has everything needed to produce the highest quality package at the fastest possible rate, for a variety of product/s and packaging applications. HANNAN machinery is designed to withstand rugged, continuous production use with a minimum of maintenance and operator skill saving your company time and money.


With instant tooling changeover these machines are ideally suited for short and long run packaging production. With the balanced heat platen, automatic thermostat, and self-aligning pressure system your assured the proper sealing of materials every time.


The Standard Packaging System is an absolute break-through from the professional innovators at Hannan Products Corporation.



Packaging Made Easy / Packaging Made in America







SKINPACK : 12X18

3D Packaging

"A 3D Sensory Decision"

(Click here to see more "Full Site")


PRO PACK: SKINPACK : 12X18 $3,150



3D Packaging - "A 3D Sensory Decision"


The new 3D SKINPACK allows consumers to view and touch the packaged products in retail spaces. Viewing and touching by a 3D SKINPACK package, is the future of packaging.


3D SKINPACK encourages the consumer to connect with the product by amplifying the sensory qualities of products in retail spaces.


Holding 3D Skinpack products can create a sense of psychological ownership, driving a "Must-Have" purchase decisions.










About Packaging Terminology


The terms "Skin Packaging" and "Blister Sealing" refer to very specific forms of packaging.


Quite often terms for other forms of packaging are used to refer to "skin packaging" and "blister packaging".


Examples of these terms are "shrink packaging", "shrink wrap" , "shrink pack", "stretch pack", stretch wrapping", "vacuum packaging", "vacuum pack", "vacuum sealing", "bubble wrap", "bubble pack", "clam shell", "blister box", and "clam pack"








SKINPACK : 18X24

3D Packaging

"A 3D Sensory Decision"

(Click here to see more "Full Site")


PRO PACK: SKINPACK : 18X24 $5,150



3D Packaging - "A 3D Sensory Decision"


The new 3D SKINPACK allows consumers to view and touch the packaged products in retail spaces. Viewing and touching by a 3D SKINPACK package, is the future of packaging.


3D SKINPACK encourages the consumer to connect with the product by amplifying the sensory qualities of products in retail spaces.


Holding 3D Skinpack products can create a sense of psychological ownership, driving a "Must-Have" purchase decisions.










About Packaging Terminology


The terms "Skin Packaging" and "Blister Sealing" refer to very specific forms of packaging.


Quite often terms for other forms of packaging are used to refer to "skin packaging" and "blister packaging".


Examples of these terms are "shrink packaging", "shrink wrap" , "shrink pack", "stretch pack", stretch wrapping", "vacuum packaging", "vacuum pack", "vacuum sealing", "bubble wrap", "bubble pack", "clam shell", "blister box", and "clam pack"








SKINPACK : 24X36

3D Packaging

"A 3D Sensory Decision"

(Click here to see more "Full Site")


PRO PACK: SKINPACK : 24X36 $7,150



3D Packaging - "A 3D Sensory Decision"


The new 3D SKINPACK allows consumers to view and touch the packaged products in retail spaces. Viewing and touching by a 3D SKINPACK package, is the future of packaging.


3D SKINPACK encourages the consumer to connect with the product by amplifying the sensory qualities of products in retail spaces.


Holding 3D Skinpack products can create a sense of psychological ownership, driving a "Must-Have" purchase decisions.










About Packaging Terminology


The terms "Skin Packaging" and "Blister Sealing" refer to very specific forms of packaging.


Quite often terms for other forms of packaging are used to refer to "skin packaging" and "blister packaging".


Examples of these terms are "shrink packaging", "shrink wrap" , "shrink pack", "stretch pack", stretch wrapping", "vacuum packaging", "vacuum pack", "vacuum sealing", "bubble wrap", "bubble pack", "clam shell", "blister box", and "clam pack"








405T-18X24 Skin Packaging

3D Packaging

"A 3D Sensory Decision"

(Click here to see more "Full Site")


Hannan Skin Packaging: 405T-18X24 $6,150



405 T Skin Packaging Machine


The 405 T is a solid, basic, industrial-grade skin packaging machine.

Built to the same exacting standards as all HANNAN® skin machines but without some of the upgrade features.

The 405T provides an affordable skin packaging machine without giving up industrial grade standards.





Optional Features


Variable Vacuum Range Control Internal Compressor
Vacuum Gauge 220V Three Phase Electrical
Production Counter (With Reset) 440 V Three Phase Electrical
Variable Heater Range Special Electrics
Pressure Gauge Vacuum Turbine





3D Packaging - "A 3D Sensory Decision"


The new 3D SKINPACK allows consumers to view and touch the packaged products in retail spaces. Viewing and touching by a 3D SKINPACK package, is the future of packaging.


3D SKINPACK encourages the consumer to connect with the product by amplifying the sensory qualities of products in retail spaces.


Holding 3D Skinpack products can create a sense of psychological ownership, driving a "Must-Have" purchase decisions.










About Packaging Terminology


The terms "Skin Packaging" and "Blister Sealing" refer to very specific forms of packaging.


Quite often terms for other forms of packaging are used to refer to "skin packaging" and "blister packaging".


Examples of these terms are "shrink packaging", "shrink wrap" , "shrink pack", "stretch pack", stretch wrapping", "vacuum packaging", "vacuum pack", "vacuum sealing", "bubble wrap", "bubble pack", "clam shell", "blister box", and "clam pack"








411T-18X24 Skin Packaging

3D Packaging

"A 3D Sensory Decision"

(Click here to see more "Full Site")


Hannan Skin Packaging: 411T 18X24 $6,900



THE 411T SERIES


An auto cycle machine with full manual over ride controls. The 411 features many of the standard features of the 420T with a less automated packaging cycle. The 411T features automatic heat and vacuum initiation. The vacuum range is fully adjustable and the production monitor keeps track of packaging cycles. The 411T meets the demands of a fulltime packaging line that requires less automation.


Features:


Pressure gauge indicates the proper air pressure for operation.

Vacuum gauge indicates the amount of vacuum being developed during the cycle.

Vacuum range control regulates the exact amount of vacuum needed for the job.

Independent heat and vacuum controls assure precise, consistent cycles.

Production monitor automatically keeps track of production rates (push button reset)

Indicator lights register all functions.

Functional layout, with analog controls, allows easy operation without the need for entry codes or programming.

Recessed, yet readily accessible instrument panel aids in quick setup and consistent cycles.





Options


Accessory work table 2 Roll film carrier
Hot wire cut-off Varible Heat Control
Internal air compressor Special electrics





3D Packaging - "A 3D Sensory Decision"


The new 3D SKINPACK allows consumers to view and touch the packaged products in retail spaces. Viewing and touching by a 3D SKINPACK package, is the future of packaging.


3D SKINPACK encourages the consumer to connect with the product by amplifying the sensory qualities of products in retail spaces.


Holding 3D Skinpack products can create a sense of psychological ownership, driving a "Must-Have" purchase decisions.










About Packaging Terminology


The terms "Skin Packaging" and "Blister Sealing" refer to very specific forms of packaging.


Quite often terms for other forms of packaging are used to refer to "skin packaging" and "blister packaging".


Examples of these terms are "shrink packaging", "shrink wrap" , "shrink pack", "stretch pack", stretch wrapping", "vacuum packaging", "vacuum pack", "vacuum sealing", "bubble wrap", "bubble pack", "clam shell", "blister box", and "clam pack"








420T-18X24 Skin Packaging

3D Packaging

"A 3D Sensory Decision"

(Click here to see more "Full Site")


Hannan Skin Packaging: 420T-18X24 $7,900



THE 420 T SERIES


A full automatic cycle machine with full manual override controls.

User friendly operation allows for high production or simple one-of-a-kind or test packaging. The high efficiency oven provides the fastest cycle with a minimum of energy. User friendly analog controls eliminate any need to access computers or programs.


Features:


Pressure gauge indicates the proper air pressure for operation.

Vacuum gauge indicates the amount of vacuum being developed during the cycle.

Vacuum range control regulates the exact amount of vacuum needed for the job.

Independent heat and vacuum controls assure precise, consistent cycles.

Production monitor automatically keeps track of production rates (push button reset)

Indicator lights register all functions.

Functional layout, with analog controls, allows easy operation without the need for entry codes or programming.

Recessed, yet readily accessible instrument panel aids in quick setup and consistent cycles.





Options


Accessory work table 2 Roll film carrier
Hot wire cut-off Varible Heat Control
Internal air compressor Special electrics





3D Packaging - "A 3D Sensory Decision"


The new 3D SKINPACK allows consumers to view and touch the packaged products in retail spaces. Viewing and touching by a 3D SKINPACK package, is the future of packaging.


3D SKINPACK encourages the consumer to connect with the product by amplifying the sensory qualities of products in retail spaces.


Holding 3D Skinpack products can create a sense of psychological ownership, driving a "Must-Have" purchase decisions.










About Packaging Terminology


The terms "Skin Packaging" and "Blister Sealing" refer to very specific forms of packaging.


Quite often terms for other forms of packaging are used to refer to "skin packaging" and "blister packaging".


Examples of these terms are "shrink packaging", "shrink wrap" , "shrink pack", "stretch pack", stretch wrapping", "vacuum packaging", "vacuum pack", "vacuum sealing", "bubble wrap", "bubble pack", "clam shell", "blister box", and "clam pack"








420T-24X30 Skin Packaging

3D Packaging

"A 3D Sensory Decision"

(Click here to see more "Full Site")


Hannan Skin Packaging: 420T-24X30 $10,500



THE 420 T SERIES


A full automatic cycle machine with full manual override controls.

User friendly operation allows for high production or simple one-of-a-kind or test packaging. The high efficiency oven provides the fastest cycle with a minimum of energy. User friendly analog controls eliminate any need to access computers or programs.


Features:


Pressure gauge indicates the proper air pressure for operation.

Vacuum gauge indicates the amount of vacuum being developed during the cycle.

Vacuum range control regulates the exact amount of vacuum needed for the job.

Independent heat and vacuum controls assure precise, consistent cycles.

Production monitor automatically keeps track of production rates (push button reset)

Indicator lights register all functions.

Functional layout, with analog controls, allows easy operation without the need for entry codes or programming.

Recessed, yet readily accessible instrument panel aids in quick setup and consistent cycles.





Options


Accessory work table 2 Roll film carrier
Hot wire cut-off Varible Heat Control
Internal air compressor Special electrics





3D Packaging - "A 3D Sensory Decision"


The new 3D SKINPACK allows consumers to view and touch the packaged products in retail spaces. Viewing and touching by a 3D SKINPACK package, is the future of packaging.


3D SKINPACK encourages the consumer to connect with the product by amplifying the sensory qualities of products in retail spaces.


Holding 3D Skinpack products can create a sense of psychological ownership, driving a "Must-Have" purchase decisions.










About Packaging Terminology


The terms "Skin Packaging" and "Blister Sealing" refer to very specific forms of packaging.


Quite often terms for other forms of packaging are used to refer to "skin packaging" and "blister packaging".


Examples of these terms are "shrink packaging", "shrink wrap" , "shrink pack", "stretch pack", stretch wrapping", "vacuum packaging", "vacuum pack", "vacuum sealing", "bubble wrap", "bubble pack", "clam shell", "blister box", and "clam pack"








420T-30X36 Skin Packaging

3D Packaging

"A 3D Sensory Decision"

(Click here to see more "Full Site")


Hannan Skin Packaging: 420T-30X36 $15,100



THE 420 T SERIES


A full automatic cycle machine with full manual override controls.

User friendly operation allows for high production or simple one-of-a-kind or test packaging. The high efficiency oven provides the fastest cycle with a minimum of energy. User friendly analog controls eliminate any need to access computers or programs.


Features:


Pressure gauge indicates the proper air pressure for operation.

Vacuum gauge indicates the amount of vacuum being developed during the cycle.

Vacuum range control regulates the exact amount of vacuum needed for the job.

Independent heat and vacuum controls assure precise, consistent cycles.

Production monitor automatically keeps track of production rates (push button reset)

Indicator lights register all functions.

Functional layout, with analog controls, allows easy operation without the need for entry codes or programming.

Recessed, yet readily accessible instrument panel aids in quick setup and consistent cycles.





Options


Accessory work table 2 Roll film carrier
Hot wire cut-off Varible Heat Control
Internal air compressor Special electrics





3D Packaging - "A 3D Sensory Decision"


The new 3D SKINPACK allows consumers to view and touch the packaged products in retail spaces. Viewing and touching by a 3D SKINPACK package, is the future of packaging.


3D SKINPACK encourages the consumer to connect with the product by amplifying the sensory qualities of products in retail spaces.


Holding 3D Skinpack products can create a sense of psychological ownership, driving a "Must-Have" purchase decisions.










About Packaging Terminology


The terms "Skin Packaging" and "Blister Sealing" refer to very specific forms of packaging.


Quite often terms for other forms of packaging are used to refer to "skin packaging" and "blister packaging".


Examples of these terms are "shrink packaging", "shrink wrap" , "shrink pack", "stretch pack", stretch wrapping", "vacuum packaging", "vacuum pack", "vacuum sealing", "bubble wrap", "bubble pack", "clam shell", "blister box", and "clam pack"








420T-24X36 Skin Packaging

3D Packaging

"A 3D Sensory Decision"

(Click here to see more "Full Site")


Hannan Skin Packaging: 420T-24X36 $11,900



THE 420 T SERIES


A full automatic cycle machine with full manual override controls.

User friendly operation allows for high production or simple one-of-a-kind or test packaging. The high efficiency oven provides the fastest cycle with a minimum of energy. User friendly analog controls eliminate any need to access computers or programs.


Features:


Pressure gauge indicates the proper air pressure for operation.

Vacuum gauge indicates the amount of vacuum being developed during the cycle.

Vacuum range control regulates the exact amount of vacuum needed for the job.

Independent heat and vacuum controls assure precise, consistent cycles.

Production monitor automatically keeps track of production rates (push button reset)

Indicator lights register all functions.

Functional layout, with analog controls, allows easy operation without the need for entry codes or programming.

Recessed, yet readily accessible instrument panel aids in quick setup and consistent cycles.





Options


Accessory work table 2 Roll film carrier
Hot wire cut-off Varible Heat Control
Internal air compressor Special electrics





3D Packaging - "A 3D Sensory Decision"


The new 3D SKINPACK allows consumers to view and touch the packaged products in retail spaces. Viewing and touching by a 3D SKINPACK package, is the future of packaging.


3D SKINPACK encourages the consumer to connect with the product by amplifying the sensory qualities of products in retail spaces.


Holding 3D Skinpack products can create a sense of psychological ownership, driving a "Must-Have" purchase decisions.










About Packaging Terminology


The terms "Skin Packaging" and "Blister Sealing" refer to very specific forms of packaging.


Quite often terms for other forms of packaging are used to refer to "skin packaging" and "blister packaging".


Examples of these terms are "shrink packaging", "shrink wrap" , "shrink pack", "stretch pack", stretch wrapping", "vacuum packaging", "vacuum pack", "vacuum sealing", "bubble wrap", "bubble pack", "clam shell", "blister box", and "clam pack"








420T-24X48 Skin Packaging

3D Packaging

"A 3D Sensory Decision"

(Click here to see more "Full Site")


Hannan Skin Packaging: 420T-24X48 $13,200



THE 420 T SERIES


A full automatic cycle machine with full manual override controls.

User friendly operation allows for high production or simple one-of-a-kind or test packaging. The high efficiency oven provides the fastest cycle with a minimum of energy. User friendly analog controls eliminate any need to access computers or programs.


Features:


Pressure gauge indicates the proper air pressure for operation.

Vacuum gauge indicates the amount of vacuum being developed during the cycle.

Vacuum range control regulates the exact amount of vacuum needed for the job.

Independent heat and vacuum controls assure precise, consistent cycles.

Production monitor automatically keeps track of production rates (push button reset)

Indicator lights register all functions.

Functional layout, with analog controls, allows easy operation without the need for entry codes or programming.

Recessed, yet readily accessible instrument panel aids in quick setup and consistent cycles.





Options


Accessory work table 2 Roll film carrier
Hot wire cut-off Varible Heat Control
Internal air compressor Special electrics





3D Packaging - "A 3D Sensory Decision"


The new 3D SKINPACK allows consumers to view and touch the packaged products in retail spaces. Viewing and touching by a 3D SKINPACK package, is the future of packaging.


3D SKINPACK encourages the consumer to connect with the product by amplifying the sensory qualities of products in retail spaces.


Holding 3D Skinpack products can create a sense of psychological ownership, driving a "Must-Have" purchase decisions.










About Packaging Terminology


The terms "Skin Packaging" and "Blister Sealing" refer to very specific forms of packaging.


Quite often terms for other forms of packaging are used to refer to "skin packaging" and "blister packaging".


Examples of these terms are "shrink packaging", "shrink wrap" , "shrink pack", "stretch pack", stretch wrapping", "vacuum packaging", "vacuum pack", "vacuum sealing", "bubble wrap", "bubble pack", "clam shell", "blister box", and "clam pack"








420T-30X48 Skin Packaging

3D Packaging

"A 3D Sensory Decision"

(Click here to see more "Full Site")


Hannan Skin Packaging: 420T-30X48 $17,500



THE 420 T SERIES


A full automatic cycle machine with full manual override controls.

User friendly operation allows for high production or simple one-of-a-kind or test packaging. The high efficiency oven provides the fastest cycle with a minimum of energy. User friendly analog controls eliminate any need to access computers or programs.


Features:


Pressure gauge indicates the proper air pressure for operation.

Vacuum gauge indicates the amount of vacuum being developed during the cycle.

Vacuum range control regulates the exact amount of vacuum needed for the job.

Independent heat and vacuum controls assure precise, consistent cycles.

Production monitor automatically keeps track of production rates (push button reset)

Indicator lights register all functions.

Functional layout, with analog controls, allows easy operation without the need for entry codes or programming.

Recessed, yet readily accessible instrument panel aids in quick setup and consistent cycles.





Options


Accessory work table 2 Roll film carrier
Hot wire cut-off Varible Heat Control
Internal air compressor Special electrics





3D Packaging - "A 3D Sensory Decision"


The new 3D SKINPACK allows consumers to view and touch the packaged products in retail spaces. Viewing and touching by a 3D SKINPACK package, is the future of packaging.


3D SKINPACK encourages the consumer to connect with the product by amplifying the sensory qualities of products in retail spaces.


Holding 3D Skinpack products can create a sense of psychological ownership, driving a "Must-Have" purchase decisions.










About Packaging Terminology


The terms "Skin Packaging" and "Blister Sealing" refer to very specific forms of packaging.


Quite often terms for other forms of packaging are used to refer to "skin packaging" and "blister packaging".


Examples of these terms are "shrink packaging", "shrink wrap" , "shrink pack", "stretch pack", stretch wrapping", "vacuum packaging", "vacuum pack", "vacuum sealing", "bubble wrap", "bubble pack", "clam shell", "blister box", and "clam pack"








Surlyn®

Skin Packaging Film





Skin Packaging Film - "A 3D Sensory Decision"


HANNAN® can fill all of your film needs. Years of experience in skin packaging and vacuum forming allows us to suggest the best film for your application.

Whether you need a high clarity, flexible skin film, or a rigid film with good forming qualities we can help.





3D Packaging - "A 3D Sensory Decision"


The new 3D SKINPACK allows consumers to view and touch the packaged products in retail spaces. Viewing and touching by a 3D SKINPACK package, is the future of packaging.


3D SKINPACK encourages the consumer to connect with the product by amplifying the sensory qualities of products in retail spaces.


Holding 3D Skinpack products can create a sense of psychological ownership, driving a "Must-Have" purchase decisions.





Surlyn®:


ALL PRICES ARE "F.O.B."

Part Number

Size

Price

9525

.005 X 20"

*

9526

.0075 X 20"

*

9527

.010 X 20"

*

9528

.012 X 20"

*

9503

.015 X 20"

*

9529

.005 X 26"

*

9530

.0075 X 26"

*

9531

.010 X 26"

*

9532

.012 X 26"

*

9542

.015 X 26"

*


*Call for current pricing.











About Packaging Terminology


The terms "Skin Packaging" and "Blister Sealing" refer to very specific forms of packaging.


Quite often terms for other forms of packaging are used to refer to "skin packaging" and "blister packaging".


Examples of these terms are "shrink packaging", "shrink wrap" , "shrink pack", "stretch pack", stretch wrapping", "vacuum packaging", "vacuum pack", "vacuum sealing", "bubble wrap", "bubble pack", "clam shell", "blister box", and "clam pack"







420C-18X24 Vacuum Forming

Industrial Machinery

(Click here to see more "Full Site")


Hannan Vacuum Forming: 420C-18X24 $9,500



THE 420 C SERIES


The 420 C Series provides the ultimate in versatility for vacuum forming and skin packaging. By combining two complete vacuum systems, a high volume turbine and positive displacement (surge tank), the 420 C Series can do the work of two machines. The 420 C can do plastic vacuum forming because of the strong vacuum created by the high volume turbine.


Vacuum forming is a versatile method of molding plastic (film) into a specific shape. Vacuum forming can be used to produce a wide variety of plastic objects such as blisters or trays. The process requires a heat source to soften the plastic sheets and a source of vacuum to "draw" the plastic into the required form.


Standard Features:


Fully Automatic Operation High Power P.D. Vacuum System (Positive Displacement / Surge Tank) Air Filter Lubricator Assembly
Two independent vacuum systems High Efficiency Vacuum Turbine System Constant "ON" Oven for Rapid Cycle Times
Internal air compressor Special electrics 2 Roll film carrier
Cantilevered Oven, Film Frame, Film Roller Carrier Blister Blowoff Convection Cooled Oven Towers
Positive Locking Film Roll Retainer Recessed Instrument Panel Indicator Lights register all functions
Film Guide Self Aligning Oven Drive Full Manual Over-Ride Controls
Gravity Down Stroke Film Frame Independent Heat and Vacuum Controls Factory Set (Internal) Pressure Regulator
High Efficiency Tubular Heating Elements Production Monitor (push button reset) Automatically keeps track of production. Plug-In Relays
"Balanced Heat" Oven Design Heavy Duty Industrial Finish Solid State Timing Modules
Heavy Duty Industrial Finish





Options:


Percentage Heat Controls Hot Wire Cut-off
2 Roll Film Carrier Special Electrics
Internal air compressor Accessory Work Table





About - "Vacuum forming"


"Simplified version of thermoforming, whereby a sheet of plastic is heated to a forming temperature, stretched onto or into a single-surface mold, and held against the mold by applying a vacuum between the mold surface and the sheet. The vacuum forming process can be used to make most product packaging"



From Wikipedia.org, the free encyclopedia





About Packaging Terminology


Examples of these terms are ("Vacuum forming" is sometimes spelled Vacume Forming or Vacuume Forming.)




420C-24X30 Vacuum Forming

Industrial Machinery

(Click here to see more "Full Site")


Hannan Vacuum Forming: 420C-24X30 $12,800



THE 420 C SERIES


The 420 C Series provides the ultimate in versatility for vacuum forming and skin packaging. By combining two complete vacuum systems, a high volume turbine and positive displacement (surge tank), the 420 C Series can do the work of two machines. The 420 C can do plastic vacuum forming because of the strong vacuum created by the high volume turbine.


Vacuum forming is a versatile method of molding plastic (film) into a specific shape. Vacuum forming can be used to produce a wide variety of plastic objects such as blisters or trays. The process requires a heat source to soften the plastic sheets and a source of vacuum to "draw" the plastic into the required form.


Standard Features:


Fully Automatic Operation High Power P.D. Vacuum System (Positive Displacement / Surge Tank) Air Filter Lubricator Assembly
Two independent vacuum systems High Efficiency Vacuum Turbine System Constant "ON" Oven for Rapid Cycle Times
Internal air compressor Special electrics 2 Roll film carrier
Cantilevered Oven, Film Frame, Film Roller Carrier Blister Blowoff Convection Cooled Oven Towers
Positive Locking Film Roll Retainer Recessed Instrument Panel Indicator Lights register all functions
Film Guide Self Aligning Oven Drive Full Manual Over-Ride Controls
Gravity Down Stroke Film Frame Independent Heat and Vacuum Controls Factory Set (Internal) Pressure Regulator
High Efficiency Tubular Heating Elements Production Monitor (push button reset) Automatically keeps track of production. Plug-In Relays
"Balanced Heat" Oven Design Heavy Duty Industrial Finish Solid State Timing Modules
Heavy Duty Industrial Finish





Options:


Percentage Heat Controls Hot Wire Cut-off
2 Roll Film Carrier Special Electrics
Internal air compressor Accessory Work Table





About - "Vacuum forming"


"Simplified version of thermoforming, whereby a sheet of plastic is heated to a forming temperature, stretched onto or into a single-surface mold, and held against the mold by applying a vacuum between the mold surface and the sheet. The vacuum forming process can be used to make most product packaging"



From Wikipedia.org, the free encyclopedia





About Packaging Terminology


Examples of these terms are ("Vacuum forming" is sometimes spelled Vacume Forming or Vacuume Forming.)




420C-24X36 Vacuum Forming

Industrial Machinery

(Click here to see more "Full Site")


Hannan Vacuum Forming: 420C-24X36 $14,000



THE 420 C SERIES


The 420 C Series provides the ultimate in versatility for vacuum forming and skin packaging. By combining two complete vacuum systems, a high volume turbine and positive displacement (surge tank), the 420 C Series can do the work of two machines. The 420 C can do plastic vacuum forming because of the strong vacuum created by the high volume turbine.


Vacuum forming is a versatile method of molding plastic (film) into a specific shape. Vacuum forming can be used to produce a wide variety of plastic objects such as blisters or trays. The process requires a heat source to soften the plastic sheets and a source of vacuum to "draw" the plastic into the required form.


Standard Features:


Fully Automatic Operation High Power P.D. Vacuum System (Positive Displacement / Surge Tank) Air Filter Lubricator Assembly
Two independent vacuum systems High Efficiency Vacuum Turbine System Constant "ON" Oven for Rapid Cycle Times
Internal air compressor Special electrics 2 Roll film carrier
Cantilevered Oven, Film Frame, Film Roller Carrier Blister Blowoff Convection Cooled Oven Towers
Positive Locking Film Roll Retainer Recessed Instrument Panel Indicator Lights register all functions
Film Guide Self Aligning Oven Drive Full Manual Over-Ride Controls
Gravity Down Stroke Film Frame Independent Heat and Vacuum Controls Factory Set (Internal) Pressure Regulator
High Efficiency Tubular Heating Elements Production Monitor (push button reset) Automatically keeps track of production. Plug-In Relays
"Balanced Heat" Oven Design Heavy Duty Industrial Finish Solid State Timing Modules
Heavy Duty Industrial Finish





Options:


Percentage Heat Controls Hot Wire Cut-off
2 Roll Film Carrier Special Electrics
Internal air compressor Accessory Work Table





About - "Vacuum forming"


"Simplified version of thermoforming, whereby a sheet of plastic is heated to a forming temperature, stretched onto or into a single-surface mold, and held against the mold by applying a vacuum between the mold surface and the sheet. The vacuum forming process can be used to make most product packaging"



From Wikipedia.org, the free encyclopedia





About Packaging Terminology


Examples of these terms are ("Vacuum forming" is sometimes spelled Vacume Forming or Vacuume Forming.)




611H-18X24 Industrial Machinery

Hydraulic Die Cutting Packaging

(Click here to see more "Full Site")


Die Cutting Machine: 611H-18X24 $19,000



Hydraulic Die Cutting Machine:

THE 620 H SERIES


The 620H is the only hydraulic die cutter designed specifically for skin and blister packaging applications. However, the 620H hydraulic die machine is not limited to these areas alone, and is equally suited for use in many other areas such as boxes, gaskets, plastics, foams, etc.

The die changeover system ( drop in tooling ) significantly reduces downtime during job changes. Simply lift the die up and out, drop a new die into place. That's it! No bolting or fastening. And because it's hydraulic, there are no time consuming mechanical adjustments. Just dial in the pressure, and you're ready to go.

The 620 H hydraulic die press machines are available from 60 to 100 Ton capacity.






Standard Features:


Precise Pressure Regulation Enclosed Die Cutting Chamber Automatic Die Cutting Shuttle
Automatic cut cycle Uses Standard ATF Fluid Hydraulic Pressure Gauge
Low Power Usage Rapid Cycle Times Panel-mounted Pressure Control
Instant Tooling Changeover Accurate Die Cutting Indexing Stainless Steel Striker Plate
Pneumatic Pressure Gauge Extended Die Life Production Monitor
Built-in Lift Point Plug-in Type Relays Safety Lock "Die Out"Switch
All Steel Construction Heavy Duty Industrial Finish Dual Push Button Operation
Production Monitor




Options


Special Electronics Steel Rule Cutting Dies
440V, 3 phase "XH" Model -- Extra Tonnage Option
Internal air compressor Accessory Work Table




About Die Cutting Terminology


Die cutting is the process of using a die to shear webs of low strength materials, such as rubber, fiber, foil, cloth, paper, corrugated fiberboard, paperboard, plastics, pressure sensitive adhesive tapes, foam and sheet metal.

In the metalworking and leather industries, the process is known as clicking and the machine may be referred to as a clicking machine.

When a dinking die or dinking machine is used, the process is known as dinking.

Commonly produced items using this process include gaskets, labels, corrugated boxes, and envelopes.



From: Wikipedia.org, the free encyclopedia





611H-24X36 Industrial Machinery

Hydraulic Die Cutting Packaging

(Click here to see more "Full Site")


Die Cutting Machine: 611H-24X36 $23,000



Hydraulic Die Cutting Machine:

THE 620 H SERIES


The 620H is the only hydraulic die cutter designed specifically for skin and blister packaging applications. However, the 620H hydraulic die machine is not limited to these areas alone, and is equally suited for use in many other areas such as boxes, gaskets, plastics, foams, etc.

The die changeover system ( drop in tooling ) significantly reduces downtime during job changes. Simply lift the die up and out, drop a new die into place. That's it! No bolting or fastening. And because it's hydraulic, there are no time consuming mechanical adjustments. Just dial in the pressure, and you're ready to go.

The 620 H hydraulic die press machines are available from 60 to 100 Ton capacity.






Standard Features:


Precise Pressure Regulation Enclosed Die Cutting Chamber Automatic Die Cutting Shuttle
Automatic cut cycle Uses Standard ATF Fluid Hydraulic Pressure Gauge
Low Power Usage Rapid Cycle Times Panel-mounted Pressure Control
Instant Tooling Changeover Accurate Die Cutting Indexing Stainless Steel Striker Plate
Pneumatic Pressure Gauge Extended Die Life Production Monitor
Built-in Lift Point Plug-in Type Relays Safety Lock "Die Out"Switch
All Steel Construction Heavy Duty Industrial Finish Dual Push Button Operation
Production Monitor




Options


Special Electronics Steel Rule Cutting Dies
440V, 3 phase "XH" Model -- Extra Tonnage Option
Internal air compressor Accessory Work Table




About Die Cutting Terminology


Die cutting is the process of using a die to shear webs of low strength materials, such as rubber, fiber, foil, cloth, paper, corrugated fiberboard, paperboard, plastics, pressure sensitive adhesive tapes, foam and sheet metal.

In the metalworking and leather industries, the process is known as clicking and the machine may be referred to as a clicking machine.

When a dinking die or dinking machine is used, the process is known as dinking.

Commonly produced items using this process include gaskets, labels, corrugated boxes, and envelopes.



From: Wikipedia.org, the free encyclopedia





620H-18X24 Industrial Machinery

Hydraulic Die Cutting Packaging

(Click here to see more "Full Site")


Die Cutting Machine: 620H-18X24 $21,000



Hydraulic Die Cutting Machine:

THE 620 H SERIES


The 620H is the only hydraulic die cutter designed specifically for skin and blister packaging applications. However, the 620H hydraulic die machine is not limited to these areas alone, and is equally suited for use in many other areas such as boxes, gaskets, plastics, foams, etc.

The die changeover system ( drop in tooling ) significantly reduces downtime during job changes. Simply lift the die up and out, drop a new die into place. That's it! No bolting or fastening. And because it's hydraulic, there are no time consuming mechanical adjustments. Just dial in the pressure, and you're ready to go.

The 620 H hydraulic die press machines are available from 60 to 100 Ton capacity.






Standard Features:


Precise Pressure Regulation Enclosed Die Cutting Chamber Automatic Die Cutting Shuttle
Automatic cut cycle Uses Standard ATF Fluid Hydraulic Pressure Gauge
Low Power Usage Rapid Cycle Times Panel-mounted Pressure Control
Instant Tooling Changeover Accurate Die Cutting Indexing Stainless Steel Striker Plate
Pneumatic Pressure Gauge Extended Die Life Production Monitor
Built-in Lift Point Plug-in Type Relays Safety Lock "Die Out"Switch
All Steel Construction Heavy Duty Industrial Finish Dual Push Button Operation
Production Monitor




Options


Special Electronics Steel Rule Cutting Dies
440V, 3 phase "XH" Model -- Extra Tonnage Option
Internal air compressor Accessory Work Table




About Die Cutting Terminology


Die cutting is the process of using a die to shear webs of low strength materials, such as rubber, fiber, foil, cloth, paper, corrugated fiberboard, paperboard, plastics, pressure sensitive adhesive tapes, foam and sheet metal.

In the metalworking and leather industries, the process is known as clicking and the machine may be referred to as a clicking machine.

When a dinking die or dinking machine is used, the process is known as dinking.

Commonly produced items using this process include gaskets, labels, corrugated boxes, and envelopes.



From: Wikipedia.org, the free encyclopedia





620H-24X36 Industrial Machinery

Hydraulic Die Cutting Packaging

(Click here to see more "Full Site")


Die Cutting Machine: 620H-24X36 $ 24,900



Hydraulic Die Cutting Machine:

THE 620 H SERIES


The 620H is the only hydraulic die cutter designed specifically for skin and blister packaging applications. However, the 620H hydraulic die machine is not limited to these areas alone, and is equally suited for use in many other areas such as boxes, gaskets, plastics, foams, etc.

The die changeover system ( drop in tooling ) significantly reduces downtime during job changes. Simply lift the die up and out, drop a new die into place. That's it! No bolting or fastening. And because it's hydraulic, there are no time consuming mechanical adjustments. Just dial in the pressure, and you're ready to go.

The 620 H hydraulic die press machines are available from 60 to 100 Ton capacity.






Standard Features:


Precise Pressure Regulation Enclosed Die Cutting Chamber Automatic Die Cutting Shuttle
Automatic cut cycle Uses Standard ATF Fluid Hydraulic Pressure Gauge
Low Power Usage Rapid Cycle Times Panel-mounted Pressure Control
Instant Tooling Changeover Accurate Die Cutting Indexing Stainless Steel Striker Plate
Pneumatic Pressure Gauge Extended Die Life Production Monitor
Built-in Lift Point Plug-in Type Relays Safety Lock "Die Out"Switch
All Steel Construction Heavy Duty Industrial Finish Dual Push Button Operation
Production Monitor




Options


Special Electronics Steel Rule Cutting Dies
440V, 3 phase "XH" Model -- Extra Tonnage Option
Internal air compressor Accessory Work Table




About Die Cutting Terminology


Die cutting is the process of using a die to shear webs of low strength materials, such as rubber, fiber, foil, cloth, paper, corrugated fiberboard, paperboard, plastics, pressure sensitive adhesive tapes, foam and sheet metal.

In the metalworking and leather industries, the process is known as clicking and the machine may be referred to as a clicking machine.

When a dinking die or dinking machine is used, the process is known as dinking.

Commonly produced items using this process include gaskets, labels, corrugated boxes, and envelopes.



From: Wikipedia.org, the free encyclopedia





620H-3036 Industrial Machinery

Hydraulic Die Cutting Packaging

(Click here to see more "Full Site")


Die Cutting Machine: 620H-3036 $28,900



Hydraulic Die Cutting Machine:

THE 620 H SERIES


The 620 H is the only hydraulic die cutter designed specifically for skin and blister packaging applications. However, the 620H hydraulic die machine is not limited to these areas alone, and is equally suited for use in many other areas such as boxes, gaskets, plastics, foams, etc.

The die changeover system ( drop in tooling ) significantly reduces downtime during job changes. Simply lift the die up and out, drop a new die into place. That's it! No bolting or fastening. And because it's hydraulic, there are no time consuming mechanical adjustments. Just dial in the pressure, and you're ready to go.

The 620 XH hydraulic die press machines are available from 60 to 100 Ton capacity.






Standard Features:


Precise Pressure Regulation Enclosed Die Cutting Chamber Automatic Die Cutting Shuttle
Automatic cut cycle Uses Standard ATF Fluid Hydraulic Pressure Gauge
Low Power Usage Rapid Cycle Times Panel-mounted Pressure Control
Instant Tooling Changeover Accurate Die Cutting Indexing Stainless Steel Striker Plate
Pneumatic Pressure Gauge Extended Die Life Production Monitor
Built-in Lift Point Plug-in Type Relays Safety Lock "Die Out"Switch
All Steel Construction Heavy Duty Industrial Finish Dual Push Button Operation
Production Monitor




Options


Special Electronics Steel Rule Cutting Dies
440V, 3 phase "XH" Model -- Extra Tonnage Option
Internal air compressor Accessory Work Table




About Die Cutting Terminology


Die cutting is the process of using a die to shear webs of low strength materials, such as rubber, fiber, foil, cloth, paper, corrugated fiberboard, paperboard, plastics, pressure sensitive adhesive tapes, foam and sheet metal.

In the metalworking and leather industries, the process is known as clicking and the machine may be referred to as a clicking machine.

When a dinking die or dinking machine is used, the process is known as dinking.

Commonly produced items using this process include gaskets, labels, corrugated boxes, and envelopes.



From: Wikipedia.org, the free encyclopedia





620XH-18X24 Industrial Machinery

Hydraulic Die Cutting Packaging

(Click here to see more "Full Site")


Die Cutting Machine: 620XH-18X24 $22,000



Hydraulic Die Cutting Machine:

THE 620 XH SERIES


The 620XH is the only hydraulic die cutter designed specifically for skin and blister packaging applications. However, the 620H hydraulic die machine is not limited to these areas alone, and is equally suited for use in many other areas such as boxes, gaskets, plastics, foams, etc.

The die changeover system ( drop in tooling ) significantly reduces downtime during job changes. Simply lift the die up and out, drop a new die into place. That's it! No bolting or fastening. And because it's hydraulic, there are no time consuming mechanical adjustments. Just dial in the pressure, and you're ready to go.

The 620 XH hydraulic die press machines are available from 60 to 100 Ton capacity.






Standard Features:


Precise Pressure Regulation Enclosed Die Cutting Chamber Automatic Die Cutting Shuttle
Automatic cut cycle Uses Standard ATF Fluid Hydraulic Pressure Gauge
Low Power Usage Rapid Cycle Times Panel-mounted Pressure Control
Instant Tooling Changeover Accurate Die Cutting Indexing Stainless Steel Striker Plate
Pneumatic Pressure Gauge Extended Die Life Production Monitor
Built-in Lift Point Plug-in Type Relays Safety Lock "Die Out"Switch
All Steel Construction Heavy Duty Industrial Finish Dual Push Button Operation
Production Monitor




Options


Special Electronics Steel Rule Cutting Dies
440V, 3 phase "XH" Model -- Extra Tonnage Option
Internal air compressor Accessory Work Table




About Die Cutting Terminology


Die cutting is the process of using a die to shear webs of low strength materials, such as rubber, fiber, foil, cloth, paper, corrugated fiberboard, paperboard, plastics, pressure sensitive adhesive tapes, foam and sheet metal.

In the metalworking and leather industries, the process is known as clicking and the machine may be referred to as a clicking machine.

When a dinking die or dinking machine is used, the process is known as dinking.

Commonly produced items using this process include gaskets, labels, corrugated boxes, and envelopes.



From: Wikipedia.org, the free encyclopedia





620XH-24X36 Industrial Machinery

Hydraulic Die Cutting Packaging

(Click here to see more "Full Site")


Die Cutting Machine: 620XH-2436 $26,300



Hydraulic Die Cutting Machine:

THE 620 XH SERIES


The 620XH is the only hydraulic die cutter designed specifically for skin and blister packaging applications. However, the 620H hydraulic die machine is not limited to these areas alone, and is equally suited for use in many other areas such as boxes, gaskets, plastics, foams, etc.

The die changeover system ( drop in tooling ) significantly reduces downtime during job changes. Simply lift the die up and out, drop a new die into place. That's it! No bolting or fastening. And because it's hydraulic, there are no time consuming mechanical adjustments. Just dial in the pressure, and you're ready to go.

The 620 XH hydraulic die press machines are available from 60 to 100 Ton capacity.






Standard Features:


Precise Pressure Regulation Enclosed Die Cutting Chamber Automatic Die Cutting Shuttle
Automatic cut cycle Uses Standard ATF Fluid Hydraulic Pressure Gauge
Low Power Usage Rapid Cycle Times Panel-mounted Pressure Control
Instant Tooling Changeover Accurate Die Cutting Indexing Stainless Steel Striker Plate
Pneumatic Pressure Gauge Extended Die Life Production Monitor
Built-in Lift Point Plug-in Type Relays Safety Lock "Die Out"Switch
All Steel Construction Heavy Duty Industrial Finish Dual Push Button Operation
Production Monitor




Options


Special Electronics Steel Rule Cutting Dies
440V, 3 phase "XH" Model -- Extra Tonnage Option
Internal air compressor Accessory Work Table




About Die Cutting Terminology


Die cutting is the process of using a die to shear webs of low strength materials, such as rubber, fiber, foil, cloth, paper, corrugated fiberboard, paperboard, plastics, pressure sensitive adhesive tapes, foam and sheet metal.

In the metalworking and leather industries, the process is known as clicking and the machine may be referred to as a clicking machine.

When a dinking die or dinking machine is used, the process is known as dinking.

Commonly produced items using this process include gaskets, labels, corrugated boxes, and envelopes.



From: Wikipedia.org, the free encyclopedia





Standard Blisters

1000 Pcs Per Box

Choose from Hannan’s large, versatile selection of 80 standard blisters, 4 standard card sizes, and 20 standard sealing fixtures, to inexpensively create your own custom configuration. You may even seal several different blisters on the same card at the same time.



Sqaure Blisters

1/4" Inch
P/N Height Cavity         Price Quantity / Buy Now
S201  1/4" 1" $97.00
S202  1/4" 1 1/2" $123.00
S203  1/4" 2" $148.00
S204  1/4" 2 1/2 $165.00
S205  1/4 3" $189.00
 
1/2" Inch
P/N Height Cavity Price Quantity / Buy Now
S206  1/2" 1" $97.00
S207  1/2" 1 1/2" $123.00
S208  1/2" 2" $148.00
S209  1/2" 2 1/2" $165.00
S210  1/2" 3" $189.00
 
3/4" Inch
P/N Height Cavity Price Quantity / Buy Now
S212  3/4" 1 1/2" $123.00
S213  3/4" 2" $148.00
S214  3/4" 2 1/2" $165.00
S215  3/4" 3" $189.00
 
1" Inch
P/N Height Cavity Price Quantity / Buy Now
S217  1" 1 1/2" $123.00
S218  1" 2" $148.00
S219  1" 2 1/2" $165.00
S220  1" 3" $189.00


Round Blisters

1/4" Inch
P/N Height Cavity         Price Quantity / Buy Now
C101  1/4" 1" $97.00
C102  1/4" 1 1/2" $123.00
C103  1/4" 2" $148.00
C104  1/4" 2 1/2 $165.00
C105  1/4 3" $189.00
 
1/2" Inch
P/N Height Cavity Price Quantity / Buy Now
C106  1/2" 1" $97.00
C107  1/2" 1 1/2" $123.00
C108  1/2" 2" $148.00
C109  1/2" 2 1/2" $165.00
C110  1/2" 3" $189.00
 
3/4" Inch
P/N Height Cavity Price Quantity / Buy Now
C112  3/4" 1 1/2" $123.00
C113  3/4" 2" $148.00
C114  3/4" 2 1/2" $165.00
C115  3/4" 3" $189.00
 
1" Inch
P/N Height Cavity Price Quantity / Buy Now
C117  1" 1 1/2" $123.00
C118  1" 2" $148.00
C119  1" 2 1/2" $165.00
C120  1" 3" $189.00


Rectangle Blisters


1/4" Inch
P/N Height Cavity Price Quantity / Buy Now
R301  1/4" 1" x 1 1/2" $104.00
R302  1/4" 1" x 2" $112.00
R303  1/4" 1" x 2 1/2" $123.00
R304  1/4" 1" x 3" $133.00
R305  1/4 1 1/2" x 2" $148.00
R306  1/4" 1 1/2" x 2 1/2" $150.00
R307  1/4" 1 1/2" x 3" $157.00
R308  1/4" 2" x 2 1/2" $164.00
R309  1/4" 2" x 3" $172.00
R310  1/4 2 1/2" x 3" $181.00
 
1/2" Inch
P/N Height Cavity Price Quantity / Buy Now
R311  1/2" 1" x 1 1/2" $104.00
R312  1/2" 1" x 2" $112.00
R313  1/2" 1" x 2 1/2" $123.00
R314  1/2" 1" x 3" $133.00
R315  1/2" 1 1/2" x 2" $148.00
R316  1/2" 1 1/2" x 2 1/2" $150.00
R317  1/2" 1 1/2" x 3" $157.00
R318  1/2" 2" x 2 1/2" $164.00
R319  1/2" 2" x 3" $172.00
R320  1/2" 2 1/2" x 3" $181.00
 
3/4" Inch
P/N Height Cavity Price Quantity / Buy Now
R321  3/4" 1" x 1 1/2" $104.00
R322  3/4" 1" x 2" $112.00
R323  3/4" 1" x 2 1/2" $123.00
R324  3/4" 1" x 3" $133.00
R325  3/4" 1 1/2" x 2" $148.00
R326  3/4" 1 1/2" x 2 1/2" $150.00
R327  3/4" 1 1/2" x 3" $157.00
R328  3/4" 2" x 2 1/2" $164.00
R329  3/4" 2" x 3" $172.00
R330  3/4" 2 1/2" x 3" $181.00
 
1" Inch
P/N Height Cavity Price Quantity / Buy Now
R331  1" 1" x 1 1/2" $104.00
R332  1" 1" x 2" $112.00
R333  1" 1" x 2 1/2" $123.00
R334  1" 1" x 3" $133.00
R335  1" 1 1/2" x 2" $148.00
R336  1" 1 1/2" x 2 1/2" $150.00
R337  1" 1 1/2" x 3" $157.00
R338  1" 2" x 2 1/2" $164.00
R339  1" 2" x 3" $172.00
R340  1" 2 1/2" x 3" $181.00
 




Custom Trays

Sealing Fixtures

(Click here to see more "Full Site")




Your tooling is easily changed. Simply lift the entire fixture out of the Blister Sealing machine, place a different fixture in the tray, Ccustom blisters and you will be ready to continue packaging... with a completely different product, card and/or blister.


HANNAN® manufactures precision sealing fixtures (trays) from only the finest, quality materials to assure consistent, high-grade seals. Available for both commercial and medical (pharmaceutical) grade applications.






Need A Quote

Contact Us


Hannan Products Corporation

9106 PULSAR COURT, UNIT C

Corona, Ca 92883


Toll Free: 800-954-4266

Phone: 951-735-1661

Fax: 951-735-0827


Email: sales@hannanpak.com


If you need a quote, or if you would like to contact us for a quote, please click here to send us a message or artwork and we will get back to you as soon as possible




Custom Trays

Sealing Fixtures

(Click here to see more "Full Site")




Your tooling is easily changed. Simply lift the entire fixture out of the Blister Sealing machine, place a different fixture in the tray, Ccustom blisters and you will be ready to continue packaging... with a completely different product, card and/or blister.


HANNAN® manufactures precision sealing fixtures (trays) from only the finest, quality materials to assure consistent, high-grade seals. Available for both commercial and medical (pharmaceutical) grade applications.






Need A Quote

Contact Us


Hannan Products Corporation

9106 PULSAR COURT, UNIT C

Corona, Ca 92883


Toll Free: 800-954-4266

Phone: 951-735-1661

Fax: 951-735-0827


Email: sales@hannanpak.com


If you need a quote, or if you would like to contact us for a quote, please click here to send us a message or artwork and we will get back to you as soon as possible




Tooling: Steel Rule Dies

Our Standard Dies Rule TM

(Click here to see more "Full Site")





HANNAN® can create your steel rule die to match your specific requirements and needs -- from simple trim dies to complex multi-unit, cavity, and gasket dies. Steel rule dies can be used to cut, trim, or score numerous materials: chipboard, paperboard, foam, rubber, cork, gaskets, sheet plastic.

HANNAN® will build your steel rule die using the best materials and utilizing our extensive experience. there is so much to be aware of when creating your die.

sery e fghw sadwt er6yjrsthz fbbs nejh whg sdb sdb

The PRECISION of the die

Rule Support -- the amount of material keeping the rule upright

Ejection Rubber -- how the die helps "eject" your item

Rule Support -- the amount of material keeping the rule upright

Cavity Placement -- how the cavity (if needed) can be placed without compromising rule support





There is much more to creating a useful, long lasting die than just inserting some rule in a board. All HANNAN dies feature the following:





3 Pt. point steel rule 11 Ply Hard Wood
Ejection Rubber Registration Clips for Precise Cutting
Cavity Dies Designed for Long Life




Tooling: Standard Steel Rule Dies

Our Diamond Dies Rule TM

(Click here to see more "Full Site")





HANNAN® can create your steel rule die to match your specific requirements and needs -- from simple trim dies to complex multi-unit, cavity, and gasket dies. Steel rule dies can be used to cut, trim, or score numerous materials: chipboard, paperboard, foam, rubber, cork, gaskets, sheet plastic.

HANNAN® will build your Diamond® steel rule die using the best materials and utilizing our extensive experience. there is so much to be aware of when creating your die.

Our Steel Rule Dies - "RULE" TM

Rule Support -- the amount of material keeping the rule upright

Ejection Rubber -- how the die helps "eject" your item

Rule Support -- the amount of material keeping the rule upright

Cavity Placement -- how the cavity (if needed) can be placed without compromising rule support




HANNAN®

Standard Diamond® Dies

In Stock Ready To Ship



HANNAN® Diamond Die: $400.00
18x24 2 Cards Up/Out "Landscape"





HANNAN® Diamond Die: $400.00
18x24 4 Cards Up/Out "Port"





HANNAN® Diamond Die: $400.00
18x24 8 Cards Up/Out "Landscape"





HANNAN® Diamond Die: $400.00
18x24 16 Cards Up/Out "Port"




There is much more to creating a useful, long lasting Diamond Die than just inserting some rule in a board. All HANNAN Diamond dies feature the following:





3 Pt. point steel rule 11 Ply Hard Wood
Ejection Rubber Registration Clips for Precise Cutting
Cavity Dies Designed for Long Life




Sealing Inserts

Holds Blister

DEMO: Instant Fixture System




How do you use a Insert?


Build your own fixture, you place your insert where you want it.



Will The Sealing Insert Fit

The Card Locator Cavity?




OK: Indicates a rectangle insert fits horizontally and vertically.


V: Indicates a rectangle insert fits "vertically only".


NO: Indicates a rectangle insert dose not fit at all.


--- SEE BELOW ---





Locators Inserts Blisters



Standard Blisters:

Round / Square


Card Locators 1,2,3,4

Blister / Insert Sizes 1 2 3 4
1" OK OK OK OK
1 1/2" OK OK OK OK
2" OK OK NO NO
2 1/2" OK OK NO NO
3" OK OK NO NO



Rectangle Blisters:

Card Locators 1,2,3,4

Blister / Insert Sizes 1 2 3 4
1" x 1 1/2" OK OK OK OK
1" x 2" OK OK V V
1" x 2 1/2" OK OK V V
1" x 3" OK OK V V
1 1/2" x 2" OK OK V V
1 1/2" x 2 1/2" OK OK V V
1 1/2" x 3" OK OK V V
2" x 2 1/2" OK OK NO NO
2" x 3" OK OK NO NO
2 1/2" x 3" OK OK NO NO


What size of "Inserts"

Can I buy?



Sealing Inserts:

Round Inserts:


Insert Size        1 2 3 4 Price Quantity / Buy Now
1" OK OK OK OK $19.95
1 1/2" OK OK OK OK $22.50
2" OK OK NO NO $25.00
2 1/2" OK OK NO NO $30.00
3" OK OK NO NO $35.00

Square Inserts:


Insert Size       1 2 3 4 Price Quantity / Buy Now
1" OK OK OK OK $19.95
1 1/2" OK OK OK OK $22.50
2" OK OK NO NO $25.00
2 1/2" OK OK NO NO $30.00
3" OK OK NO NO $35.00

Rectangle Inserts:

Insert Size    1 2 3 4 Price Quantity / Buy Now
1" x 1 1/2" OK OK OK OK $21.50
1" x 2" OK OK V V $22.50
1" x 2 1/2" OK OK V V $23.50
1" x 3" OK OK V V $24.50
1 1/2" x 2" OK OK V V $25.00
1 1/2" x 2 1/2" OK OK V V $26.00
1 1/2" x 3" OK OK V V $27.00
2" x 2 1/2" OK OK NO NO $30.00
2" x 3" OK OK NO NO $32.50
2 1/2" x 3" OK OK NO NO $34.00


Sample below



1 Card at a time

3" Sealing Insert





Card Locators

Positions Card to Blister




Pro Pack: Card Locators

A Card Locator?


This revolutionary New Pro-Pack® B6X9 blister sealing machine and Hannan’s New system of standard tooling, standard cards and standard blisters will slash the cost and complexity of most small part blister card packaging production!

There is no compromise with quality blister packaging. The desktop machine, the sealing fixtures, the blisters and the cards are all high quality Hannan standard, in stock and ready to ship!

This an absolute break-through from the professional innovators at Hannan Products Corp.

Positions your card and blister during the blister sealing cycle




Card Locators: How many cards?

B6x9 Blister Sealing Machine


P/N Card Size At a Time Price Quantity / Buy Now
CL-A4-69 A 4 Cards $69.00
CL-B3-69 B 3 Cards $69.00
CL-C2-69 C 2 Cards $69.00
CL-D1-60 D 1 Cards $69.00
TBA Bottom Board 1 BRD B6X9 $9.50




Card Locators: How many cards?

B9X12 Blister Sealing Machine


P/N Card Size At a Time Price Quantity / Buy Now
CL-A8-912 A 8 Cards $149.50
CL-B6-912 B 6 Cards $149.50
CL-C4-912 C 4 Cards $149.50
CL-D2-912 D 2 Cards $149.50
TBA Bottom Board 3 Boards $19.95
TBA Bottom Board 1 Board $9.95




Locator, Insert, and blister





Tooling: Fixtures

Standard Sealing Fixtures

(Click here to see more "Full Site")





Custom Sealing Fixtures:

Aluminum / Wood

HANNAN® Sealing fixtures can be made to fit virtually any machine.

The Standard or Commercial fixtures are designed for rugged continuous use.

The tray fixture base is made from a solid composite material that maintains better tolerances and resistance to crushing and warping than the more traditional plywood type materials.

Incorporated into the fixture base are HANNANPAK® registration pins (a smooth acting, accurate long life spring pin) and HANNANPAK® seal flange material.













Tooling: Custom

Sealing Fixtures

(Click here to see more "Full Site")





Custom Sealing Fixtures:

Aluminum / Wood

HANNAN® Sealing fixtures can be made to fit virtually any machine.

The Standard or Commercial fixtures are designed for rugged continuous use.

The tray fixture base is made from a solid composite material that maintains better tolerances and resistance to crushing and warping than the more traditional plywood type materials.

Incorporated into the fixture base are HANNANPAK® registration pins (a smooth acting, accurate long life spring pin) and HANNANPAK® seal flange material.













Tooling: Fixtures

Medical Sealing Fixtures

(Click here to see more "Full Site")





Medical Sealing Fixtures


We make them,

design them,

test them ,

ship them,


Made in U.S.A. by American's







Custom Sealing Fixtures:

Aluminum / Wood

HANNAN® Sealing fixtures can be made to fit virtually any machine.

The Standard or Commercial fixtures are designed for rugged continuous use.

The tray fixture base is made from a solid composite material that maintains better tolerances and resistance to crushing and warping than the more traditional plywood type materials.

Incorporated into the fixture base are HANNANPAK® registration pins (a smooth acting, accurate long life spring pin) and HANNANPAK® seal flange material.








Printing: Skin Cards

Standard Skin Cards

(Click here to see more "Full Site")





Standard Skin Cards


We make them,

Design them,

Test them ,

Ship them,


Made in U.S.A. by American's





HANNANPAK CHIP-CHIP®

Cards

Color

QTY

CHIP-CHIP®

BLACK

60

CHIP-CHIP®

BLUE

60

CHIP-CHIP®

RED

60

CHIP-CHIP®

WHITE

60

CHIP-CHIP®

YELLOW

60





HANNANPAK CHIP-COR®

Cards

Color

QTY

CHIP-COR®

BLACK

75

CHIP-COR®

BLUE

75

CHIP-COR®

RED

75

CHIP-COR®

WHITE

75

CHIP-COR®

YELLOW

75





HANNANPAK DW CHIP

Cards

Color

QTY

DW CHIP

BLACK

150

DW CHIP

BLUE

150

DW CHIP

RED

150

DW CHIP

WHITE

150

DW CHIP

YELLOW

150





HANNANPAK CORRUGATED (AC)

Cards

QTY

CORRUGATED (AC)

100

CORRUGATED (AC)

50

CORRUGATED (AC)

50


* Call for current pricing *


Phone: 800-954-4266





There is more to making a skin or blister card than just printing on a piece of board stock. All materials must be specifically selected for their compatibility with one another, which includes specially formulated inks, solvents, papers, and coatings, all of which must be systematically applied. Hannan® Products Corporation, through years of research and development, with complete in-house processing, has developed a unique series of patented manufacturing processes which allows HANNNAN® to produce the most consistantly high quality cards possible. HANNANPAK™ materials help eliminate production problems and reduce your packaging costs. HANNAN® manufactures materials for standard applications to super strength materials for heavy-duty use. These materials are available as while blanks, solid color blanks, or may be printed in simple one color line work to sophisticated four-color process.



HANNAN® manufactures a wide variety of Skin Card Materials. From standard duty HANNANPAK™ non-perf materials for small or light weight product to heavy-duty HANNANPAK™ chip-cor for large or heavy product. HANNANPAK™ Skin Cards can be printed to your specifications or may be provided as white blanks or solid color blanks.






HANNANPAK™ Logo Cards



A HANNANPAK™ Logo Card is a great way to get into Skin Packaging. With your company Logo repeated over and over in a scatter print format. A single skin card design can be used to package a complete product line.




HANNANPAK™ Master Sheets (Unit Cards)



In the skin packaging process, it is common to package several products at once. The skin card can be a solid color, blank white, a logo card (company logo repeated over & over) or a master sheet/unit card.


The master sheet/unit card has an art format and image size designed for a specific product. The art work may describe the products, uses and benefits. Part number and descriptions as well as directions and U.P.C. symbols can also be applied.


The product related artwork can be repeated on the master sheet.


For example: On a 18" x 24" master sheet, a unit size of 11 3/4" x 17 1/2" may be repeated 2 times. A unit size of 4 3/8" x 5 7/8" would be repeated 16 times. This would allow you to package 16 separate units in one sealing cycle. .





Printing: Skin Cards

Custom Skin Cards

(Click here to see more "Full Site")





Custom Skin Cards


We make them,

design them,

test them ,

ship them,


Made in U.S.A. by American's



There is more to making a skin or blister card than just printing on a piece of board stock. All materials must be specifically selected for their compatibility with one another, which includes specially formulated inks, solvents, papers, and coatings, all of which must be systematically applied. Hannan® Products Corporation, through years of research and development, with complete in-house processing, has developed a unique series of patented manufacturing processes which allows HANNNAN® to produce the most consistantly high quality cards possible. HANNANPAK™ materials help eliminate production problems and reduce your packaging costs. HANNAN® manufactures materials for standard applications to super strength materials for heavy-duty use. These materials are available as while blanks, solid color blanks, or may be printed in simple one color line work to sophisticated four-color process.



HANNAN® manufactures a wide variety of Skin Card Materials. From standard duty HANNANPAK™ non-perf materials for small or light weight product to heavy-duty HANNANPAK™ chip-cor for large or heavy product. HANNANPAK™ Skin Cards can be printed to your specifications or may be provided as white blanks or solid color blanks.






HANNANPAK™ Logo Cards



A HANNANPAK™ Logo Card is a great way to get into Skin Packaging. With your company Logo repeated over and over in a scatter print format. A single skin card design can be used to package a complete product line.




HANNANPAK™ Master Sheets (Unit Cards)



In the skin packaging process, it is common to package several products at once. The skin card can be a solid color, blank white, a logo card (company logo repeated over & over) or a master sheet/unit card.


The master sheet/unit card has an art format and image size designed for a specific product. The art work may describe the products, uses and benefits. Part number and descriptions as well as directions and U.P.C. symbols can also be applied.


The product related artwork can be repeated on the master sheet.


For example: On a 18" x 24" master sheet, a unit size of 11 3/4" x 17 1/2" may be repeated 2 times. A unit size of 4 3/8" x 5 7/8" would be repeated 16 times. This would allow you to package 16 separate units in one sealing cycle. .





Printing: Blister Cards

Stock Blister Cards

(Click here to see more "Full Site")





Standard Blister Cards


We make them,

stock them,

test them ,

ship them,


Made in U.S.A. by American's



Blister sealing Cards on the Shelf

Our Card are sold 1000 pieces to the box.

Just pick the size and color needed.




Best Adhesion

Blister Cards are made to provide the best adhesion with the fastest cycle time. They can be printed to match your art specifications and die cut to the finished size. Blister cards are available in a number of standard sizes. Special shapes, configurations, cutouts, etc. can also be accommodated.




What size of "cards" can I buy?

1,000 pcs per box


Card Size Dimention Price
A 2 7/8 X 4 11/16 $59.50 /M
B 2 7/8 X 5 7/8 $78.50 /M
C 4 3/8 X 5 7/8 $98.50 /M
D 5 7/8 X 8 3/4 $198.50 /M




What color of "cards" can I buy?

1,000 pcs per box


Blue, Red, Yellow, Black or White.



Size Color Dimention Price Quantity / Buy Now
A White 2 7/8 X 4 11/16 $59.50 /M
A Yellow 2 7/8 X 4 11/16 $59.50 /M
A Black 2 7/8 X 4 11/16 $59.50 /M
A Red 2 7/8 X 4 11/16 $59.50 /M
A Blue 2 7/8 X 4 11/16 $59.50 /M




Size Color Dimention Price Quantity / Buy Now
B White 2 7/8 X 5 7/8 $78.50 /M
B Yellow 2 7/8 X 5 7/8 $78.50 /M
B Black 2 7/8 X 5 7/8 $78.50 /M
B Red 2 7/8 X 5 7/8 $78.50 /M
B Blue 2 7/8 X 5 7/8 $78.50 /M




Size Color Dimention Price Quantity / Buy Now
C White 4 3/8 X 5 7/8 $98.50 /M
C Yellow 4 3/8 X 5 7/8 $98.50 /M
C Black 4 3/8 X 5 7/8 $98.50 /M
C Red 4 3/8 X 5 7/8 $98.50 /M
C Blue 4 3/8 X 5 7/8 $98.50 /M




Size Color Dimention Price Quantity / Buy Now
D White 5 7/8 X 8 3/4 $198.50 /M
D Yellow 5 7/8 X 8 3/4 $198.50 /M
D Black 5 7/8 X 8 3/4 $198.50 /M
D Red 5 7/8 X 8 3/4 $198.50 /M
D Blue 5 7/8 X 8 3/4 $198.50 /M




Printing: Blister Cards

Custom Blister Cards

(Click here to see more "Full Site")





Custom Blister Cards


We make them,

design them,

test them ,

ship them,


Made in U.S.A. by American's



HANNAN® Blister Cards

HANNANPAK® Blister Cards are made to provide the best adhesion with the fastest cycle time.

They can be printed to match your art specifications and die cut to the finished size.

Blister cards are available in a number of standard sizes.

Special shapes, configurations, cutouts, etc. can also be accommodated.





About Us

About Us:

Hannan Products Corporation




DEMO: Instant Fixture System

JW Player goes here


Hannan® has been a leader in packaging for over 40 years. What we build, we build to last!


Today's economy demands that you operation be efficient and productive. Hannan® is here to help you achieve that goal¦


Years of experience has allowed us to produce durable, time-tested, efficient machines, and our experience with the process allows us to supply the right machine or material at the right price. Experts in high volume production packaging systems, economical systems for lower volume production, and specialized medical packaging requirements.


We at Hannan® are not satisfied with just being the best! We are constantly striving to extend our high standards of quality, while providing competitive pricing.


We occupy a unique position as a manufacturer and supplier of the entire spectrum of packaging needs: skin packaging machines; blister packaging machines, die cutting machines, vacuum forming machines, skin packaging film, vacuum forming film, custom and standard skin and blister cards, standard blisters; custom tooling and blisters.


This ability provides Hannan® with an intimate knowledge of the functional relationship of these components, but also provides you with TRUE one source suppler





Contact Us

Contact Us For Quote

Pro Pack


Hannan Products Corporation

9106 PULSAR COURT, UNIT C

Corona, Ca 92883


Toll Free: 800-954-4266

Phone: 951-735-1661

Fax: 951-735-0827


Email: sales@hannanpak.com


If you have any questions or comments, or if you would like to contact us for a quote, please email us and we will get back to you as soon as possible.




Prices, shown on this website are subject to change without notice. While every effort is made to keep prices accurate and up-to-date, ANY price shown on this website for our Products or Supplies are in terms with current pricing.

All prices are subject to change at any time without notice at the discretion of Hannan Products Corporation.